Steel Structures Fireproofing

        FIRECUT F-1

 

 


FIRECUT F-1
Fire Protection For Steel Structures


FIRECUT F-1 (Medium Density) The cementitious fire protection coatings of FIRECUT F-1 Fire Protection For Steel Structures is designed for steel structures so as to have excellent adhesion to steel substrates for exposed interior, usage. FIRECUT F-1 Fire Protection For Steel Structures is formulated with materials such as cement, vermiculite, fiber(asbestos free) and some other inorganic materials, where it shows the toughness and strength of concrete as well as the flexibility of the crosslinked network of fiber. The physical properties is significantly better than equivalent products in the market.
When it was burned in the fire, no smoke was produced. After burning of 3 Hours, the burned coating kept as strong as it was before the burning and therefore, it will not be destroyed by the occurred wind-storm in the accidents.

No Corrosive
Due to the components of FIRECUT F-1 Fire Protection For Steel Structures can prohibit the oxidation of  iron. It is not corrosive to the steel substrate.

No Asbestos& Smoked Development
From the test by Union Chemical Lab of Industrial Technology Research institute, it shows that FIRECUT F-1 Fire Protection For Steel Structures does not contain any asbestos.
FIRECUT F-1 Fire Protection For Steel Structures has passed the test in addordant ASTM E84 (Fire Hazard) standard, the smoked developed is zero.

High Performance
As it is applied and dried on the steel, FIRECUT F-1 Fire Protection For Steel Structures is tough and light. The impact resistance, compressive strength and bending durability are significantly higher than equivalent products. The coefficient of heat-transfer is very low; due to that of vermiculite.

Easy Installation
FIRECUT F-1 Fire Protection For Steel Structures can be sprayed by mixing with water. It has an advantage that the good workability is accompanied by anti-sagging property, i.e., one case can reach more than 25mm. without sagging. FIRECUT F-1 Fire Protection For Steel Structures has an excellent adhesion ability to steel substrates, thus it can be sprayed on the steel substrate without pre-coat or adhesion promoters.

Excellent Fire Protecting Ability
FIRECUT F-1  Fire Protection For Steel Structures shows an excellent fire-protecting ability. As shown in the picture, after being burned for 5 hours, the deflection the restrained beam coated by FIRECUT F-1 with the thickness of 3 hours fire rating was well within the allowable range.

Best Quality
FIRECUT F-1 Fire Protection For Steel Structures shows excellent physical properties. It has been tested by the public testing institute according to standard, and the results are better than those of the equivalent products.

Standard Fire Test
FIRECUT F-1 Fire Protection For Steel Structures shows excellent rating compared to the equivalent products, classified to U.S. by the underwriters Laboratories Inc.(UL263) and NFPA251

UL Certificate
The production and sampling was supervised under the representatives from Underwriters Laboratories Inc. The Fire protecting ability of those materials have been classified by the Underwriters Laboratories Inc. and as indicated on the UL Fire Resistance Directory
 
Automatic Production
FIRECUT F-1 Fire Protection For Steel Structures is mass produced by totally automatic machines, so that its quality is uniform and stable and can be reliably supplied to customers.

 

 



 

 

Home     |     Company profile     |     Our Products     |    News & Activity     |     Quality System     |     Project Reference     |     Contact Us      
© Copyright 2011,Bitec enterprise Co.,Ltd. All Rights Reserved Design by Webdesignthai